4020 Blower Fan Adapter for Sovol SV06 and SV06 plus - heat set REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to replace the 4010 extruder cooling fan with a 4020 blower fan, with holes wide enough for threaded inserts.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A very simple remix of a a 4020 fan assembly for the extruder/coldend . Print as oriented with supports. You will need 3x M3x3mm heat set threaded inserts, 4mm diameter (such as the ones sold in this pack on AliExpress). I've included a model with holes for the 4.6mm inserts sold by Prusa and CNC Kitchen, but the plastic gets a little thin so it's not the best choice. Mounts with 3x M3x15mm bolts.
If you don't want heat set threaded inserts (or don't have any that are small enough), I recommend the remix that uses M3 bolts instead.