Lenovo Legion Go - Controller Travel Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caddy used to protect LeGo controllers when separated for transport. Covers most of the buttons except the 4 back ones.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Original idea from reddit u/lizhu27 and u/KaliumPuceon, intended to better protect the separated controllers and cover most of the buttons/triggers when stored in a travel bag. I kept the bottom flat so the caddy will stand up by itself on a table.
Join two halves together with x4 3M 16mm and x4 3M hex nuts. Shorter 8mm-14mm screws will also work and not use hex nuts.
There's space for a 2mm thick and 15mm tall velcro band to hold the controllers to the caddy, and a loop to thread a carry strap near the top.
Printed in PETG 25% infill, 4 walls 0.2mm height on Prusa MK4S.
Prints with the side that joins the parts together face down on the bed, supports are needed for the cup-area that covers the triggers.
STEP and F3D files included for modifications.