minimalistic lid raiser | creality k2 plus | Cartographer3D USB cable break through
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic lid raiser to route out the USB cable for the Cartographer3D on the Creality K2
- Ocena
- 3 / 5
- Polubienia
- 11
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Target
If you don't want to mess with the backside PTFE tube gasket, use this minimalistic lid raiser to route the Cartograpers3D USB cable to the external USB port.
For all others who are looking for a lid raiser to stop the PTFE tube scrubbing, you won't completely solve the issue since the PTFE tube still scrubs on both sides of the top of the frame (use some PTFE tube clips to solve the scrubbing issue completely).
0.2mm layer height
Use ASA, ABS, or at least PET-G
If you want to go crazy you can print the USB cable adapter in TPU, but every regular filament works as well
Parts
a few cable ties
2mm x 15mm seal https://de.aliexpress.com/item/1005005900732831.html (or some textile tape)
Optional (as an alternative, you can glue the parts)
8x 12mm M3 screw
8x m3 nut
Bonus
Everything fits on one plate, happy printing :)
Links
Cartograpter3D Adapter
https://www.printables.com/model/1198696-k2-plus-cartographer-mount-shroud-and-spacers
Clips
https://www.printables.com/model/1148015-creality-k2-plus-bowden-tube-clips