Case for Screwdrivers Precision Mechanics (brand: BGS-Technic)

Did not like the blister pack. So I redesigned "Yanev's Rugged Box" and created new inlets.

Design is like follows:

• Rugged Box Case
• Rugged Box Lid
• Two Latches (PETG)
• Left Inlet
• Right Inlet
• 12 x Assymetrical Pins
• 12 x Neodym Magnets ø8x4mm
• 6 x Dowel Pins ø3x30
• Some Glue
• Some Double-Adhesive Tape

Print all parts. Box is assembled easily, case, lid and two latches, connected by the dowel pins. Probably some glue may help that the dowel pins stay in place. Those pins force you to orient the screwdrivers in one of two directions. And when you manage to orient them with description showing upwards, you will easily find your required tool. That make working a lot easier.

The inlets are equipped with the (PETG) pins, those are not symmetrical, chamfered and are put into the inlets from bottom side. Apply some glue for good stciking. Put some more glue into the larger ø8mm holes and press the neodyms in. I would recommend putting them into the holes with aligned north-south pole orientation. Pay attention when glueing them in that the smal holes provide excessive glue to escape. So put something underneath when doing this, in order not to unneccessary mess up your desktop or workbench. Let the glue dry thoroughly.

Apply the adhesive tape under the inlets. Two 20-25mm strips over the short side should be sufficient.

In file section I also added a plain plate (1.2mm thick) for your own creation (just plain or name, logo, whatsoever).

Note: The holes for the ø3mm dowel pins are very fragile!). Be careful, drilling them up! 
This is a adisadvantage of the design. Maybe printing on the side would be better, with much support?

Printed with Green Matte Geeetech filament on my Bambu A1. Plate printed on my MK4 with MMU3. .

Thanks to @Yanev for this great basic rugged box design!

Explore my other Printables: https://www.printables.com/de/@Tritschi