Hatchbox Stationary Spool Holder/Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SOME ASPECTS OF THIS ARE UNTESTED PRINT AT YOUR OWN RISK The bearing clearance is 0.2mm so make sure your printer can…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SOME ASPECTS OF THIS ARE UNTESTED
PRINT AT YOUR OWN RISK
The bearing clearance is 0.2mm so make sure your printer can handle it.
Just a spool holder/spinner I had in my head based on my recent project so I decided to sketch it in cad.
Designed with Hatchbox spools in mind as that is what I mainly use.
If you print it let me know how it goes. I personally have no use for this setup specifically. I use some of these parts for the delta pro spinner though.
Category: 3D Printer Parts