1 / 3
QIDI Plus4 Compact Poop chute with removable poop tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact poop chute that needs minimal clearance at the back and has a removable poop tray for easy waste disposal.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 247
- Wydruki
- 1
- Wyświetlenia
- 721
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (26)Powiązane
Was inspired by the remixed design, but made a few significant changes such as:
- - Removeable poop tray, with angle of slide adjusted to suit
- - I found the slide was a little too short for my setup, or it could of just been my mods, so it was extended a tiny bit
- - rearranged attachment piece to so it wouldn't really require supports to print
- - as a strength upgrade for this, included optional gasket, which has adds a slightly thicker mounting plate, found it wasn't really needed, but if you are moving it around alot it may be handy with the extra strength.
- - added a more sturdy base to prevent need for many supports, however if you print fast its recommended to have a support at the end to keep the model stable