1 / 2
HORL 3 Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box to store my knife sharpener HORL3 with its additional stones.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 513
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (16)Powiązane
Presentation
I've found on Printables an interestring box to store the Horl3 knife sharpener. However, I have also the additional stones to store. So I decided to make a box from scratch.
It is maybe over engineered but it works great.
- Filament : PLA or PTEG or any other type
- Supports : no need but you can use support generators for the stone position of the box parts 2 and 3.
- Brim : for the box parts 2 and 3
- Wall : 2
- Infill : 15%