Power Vacuum Board Game Insert (Deluxe + Sleeves)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organization tray / insert for the deluxe edition of the Power Vacuum board game with room for sleeved cards.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATED August 7, 2025 - Added more gap to the disc token channel based on feedback from others (Thanks dberstein).
NOTE: There's a good remix over on Thingiverse that adds storage for the cardboard pieces to the spacer.
---------------------
Insert to better organize the deluxe edition of the trick taking card/board game Power Vacuum created by Keen Bean Studio. Highlights include:
- Cup for storing energy tokens during play and in the box
- Tray for storing the statue pieces split into areas for the base / legs / torso / head
- If you have the golden head piece from the Kickstarter, that needs to be stored in the extra space with the torsos
- Card tray has 2 pockets for player aids and agenda cards
- Fits Sleeve Kings 60 micron sleeves. Will NOT fit sleeves any larger.
- Can be used for discards during game play
- Board tray keeps the multi-layer board securely in place with storage for remaining game bits safely underneath.
To save on filament, I printed the spacer with 10% grid infill and 0 top/bottom layers. All other settings used in the prints in the images were my default settings:
- 15% Gyroid infill
- .2mm layer height
- .4mm diameter tip
Requires a print bed that fits a 200mm x 200mm print, otherwise you will need to slice the board tray and spacer.