S Shaped Tolerance Test 0.1-0.4mm in 0.02mm Increments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems…
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 554
- Wydruki
- 3
- Wyświetlenia
- 2893
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best.
This test is incremental by 0.02 and based on my round test.
UPDATE: Added an attempt at a model with some slicer manipulation techniques in the design. This one should be more fun to watch as it prints and more uniform movements lol ;o
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
Category: 3D Printing Tests