Wall mount Milwaukee QUIK-LOK Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mountable hanger for Milwaukee QUIK-LOK string trimmer accessories
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 450
- Wydruki
- 1
- Wyświetlenia
- 2398
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Allows you to wall mount your Milwaukee QUIK-LOK accessories easily. Tested with the trimmer, edger, & hedge trimmers. Not sure how it will handle some of the heavier tools like the power brooms.
The V2 holder is a bit thicker because I did have one break after a year of use.
Hardware required: One M3 heat set insert, one M3x40 machine screw, 2 screws for mounting to wall (hole diameter is 5.7mm (0.22 in) countersunk-ish)
Slicing: Print with many walls for strength. ASA/Nylon/ or anything with good layer adhesion recommended. Be sure to move the seam to the back of the latch. The slicer likes to put it on the narrowest part of the latch making it super weak.