DemonSlayer_Nezuko
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
She is looking so cute! Please let me know if you like her!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Nezuko.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 120x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Sunlu Misletoe Green Transmission Distance: 4
PLA Bambu Purple Transmission Distance: 1.6
PLA Bambu Brown Transmission Distance: 2
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu Cyan Transmission Distance: 0.1
PLA 3DHoJor Blue Grey Transmission Distance: 2.4
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu White Transmission Distance: 5.9
This print uses 10 unique filaments
Swap Instructions for one AMS:
Start with Black (Slot1)
At layer #7 (0.64mm) swap to Orange (Slot2)
At layer #12 (1.04mm) swap to Misletoe Green (Slot3)
At layer #13 (1.12mm) swap to Purple (Slot4)
Pause at layer 14 to allow color swap:
Slot1: Black --> Brown
Slot2: Orange --> Yellow
Slot3: Green --> Cyan
At layer #15 (1.28mm) swap to Brown (Slot1)
At layer #16 (1.36mm) swap to Yellow (Slot2)
Pause at layer 18 to allow color swap:
Slot4: Purple --> Blue Grey
Slot1: Brown --> Red
At layer #19 (1.6mm) swap to Cyan (Slot3)
At layer #20 (1.68mm) swap to Blue Grey (Slot4)
At layer #21 (1.76mm) swap to Red (Slot1)
Pause at layer 24 to allow color swap:
Slot2: Yellow --> White
At layer #25 (2.08mm) swap to White (Slot2) for the rest.