1 / 5
Skoda Scala holder for a car key and coins
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a car key and coins designed for the Skoda Scala. It will likely also fit other Skoda Auto models.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
I have created a holder for a car key and coins designed for the Skoda Scala. It will likely also fit other Skoda Auto models (Fabia, Kamiq, Octavia…) as well as other vehicles within the VW Group. The top diameter is 69 mm, the bottom diameter is 62 mm, and the height is 55 mm. For better stability of the holder, I recommend using a self-adhesive rubber stopper on the back side. I recommend printing it from PETG or another heat-resistant material.