XRP Orbit Odyssey Boundary Pipe Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Andy mark sells 24.5 in pipe for the field boundary but not the entire field length. XRP has this in the field CAD.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
After printing all the files from the original XRP Orbit Odyssey files, i noticed that AndyMark is only selling 24.5 inch pipes in the kit. Looking at the CAD that XRP had available, I saw that the part was missing from the upload to Printables.
I did change the internal length a bit, just so there is more interface with the pipes. Keep in mind as of right now I haven't actually tested it on the actual pipe. I plan on doing that once I get the pipes from AndyMark. (Read Update Below)
Update
After testing this with the AndyMark pipes, they gave me a few with different internal diameters. I adjusted the diameter, the opening, and separated each side to allow for different internally sized pipes. This also should allow to work with a wider range of pipes.