1 / 3
TIG filler rods tube Organizer / WIG Stäbe Rohr Organizer — zdjęcie 1
1 / 3

TIG filler rods tube Organizer / WIG Stäbe Rohr Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a simple solution to organize your TIG filler rods in 50mm HT Tubes

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
1
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

i recently created a welding cart for my TIG welder. 
A crucial part of it is tubes to separate and organize my filler wire. 
The idea was a Tube for each type of Material and Separation between diameter. 
i made 3 slots wich can hold at least 1kg of filler Material. 
Enough for every little Project and everything on hand….

The fit of the separator is quite tight. Its personal preference, but i wanted to make sure everything stays in place all the time, without worrying about accidentaly pulling it out with wire. 

i share my CAD files for Fusion360, because i made everything parametric. 
you can change Diameter for different types of Tubing and different numbers of slots as well. 
Also you can change the fit, if you prefer a looser fit.

I needed Endcaps on the Bottom as well, to fix the tube on the bottom i share them as well.


since this is free, please consider liking, and sharing! 
This does costs nothing and supports creators at least a bit.

if you wanna support me, feel free to buy me a coffee :)

Happy Printing and Happy Welding!

Tagi