1 / 3
snap fit lock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snap fit locking system. It is designed to hold two separate objects together with a snap in place constrained
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 241
- Wydruki
- 0
- Wyświetlenia
- 1615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane
Basically not much to do besides printing with desired infill.
Screw to two objects at watch it snap in place.
This design has been made in order to repair an old poker case.
Sizes might scaled up or down.
Print time is around 19 min on a Prusa i3 Mk3S.
To be assembled as follows :