1 / 5
Lego Part
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built a LEGO Technic car, but one part was missing, so I recreated it in CAD.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this model with 100% infill in PETG, and it worked perfectly. The LEGO rods fit in really well and have the right amount of resistance.
In the attached G-code below, the print is sliced once with a brim and once without. So far, I’ve only printed it with a brim, and it had excellent adhesion on the textured printing plate. So I assume it will stick well even without the brim.