T-Beam Supreme Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a T-Beam Supreme that completely replaces the default spacer components.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 1051
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
Top and bottom halves for the case printed with 15% infill and base supports seems to work well enough.
This case requires complete disassembly of the device including separation of the GPS module and screen from the plastic spacer.
To reassemble, attach and slip the screen connector through the slim hole in the top half of the case. Attach GPS antenna to the inside of the top half of the case under the screen and the LORA antenna connector through the hole in the opposite side. Attach main board to the top half, route antenna connections, then attach the module board to the top with the screw removed from the original module. Press fit the bottom half of the case and screw or glue if desired.