Voron V0 Hinged Rear Panel Hex Mesh 4020 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed version of the excellent meshed door but for a 4020 fan on the outside
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted to use a noctua fan to reduce the noise from the stock fan and also for better cooling. I've included the STEP file of a simple fan cover so you can modify it if needed. Also included is the STEP file of the door so you can change for different fan sizes. I has sized the holes for M4 heat sinks (short type) but a nut and washer would work as well.
I decreased the magnet thickness to 2mm (because gridfinity) but have included the original 3mm ones as well.
Finally, the rear panel mesh .3mf includes the modifiers needed to get the honeycomb pattern, just set your printer/material then you should be good to go!