1 / 8
Yugioh Sliding Lids Deck Boxes *Updated to fit 2025 Tins' Card Divider* — zdjęcie 1
1 / 8

Yugioh Sliding Lids Deck Boxes *Updated to fit 2025 Tins' Card Divider*

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deck boxes come in two sizes for 40—and 60-card main decks and can fit the extra and side decks with sleeves.

Ocena
0 / 5
Polubienia
10
Pobrania
90
Wydruki
0
Wyświetlenia
787
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

*2mm wider to allow the 2025 Tin's card divider to fit inside comfortably*

I wanted to create a deck box that fits my sleeved cards, isn't too fancy, and is simple to get my cards in and out. 

Curved designs so the print won't have any sharp edges to protect the cards.

The top lid can be slid in and out with a little pressure.

Made the front lid have space to have labels or decals that won't be easily rubbed off.

The Dice Holder can hold 12 Konami's dice.

Thin deck divider with tab to write on.

Recommended Settings

Layer Height - .08 to .2 mm

Infill - Gyroid 15% to 25% for box rigidness

Walls - 2 to 3

Top Surface pattern - Concentric

Brim - Brim ears on all the corners to prevent warping on the corners

Tree supports - only for the lip on the back of the box, they should be small enough to be able to poke out.

Ironing - Optional, but does look nice when finished, match the ironing pattern with the top surface pattern

Speed - I recommend lowering the speed of your printer to prevent the head from stretching the sides of the case.

Tagi