Frigidaire Refrigerator Shelf Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed my previous model to clean up some of the rough edges. Now with built in mouse ears and break away support.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 189
- Wydruki
- 4
- Wyświetlenia
- 2213
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
The door shelves on every Frigidaire refrigerator Ive owned has broken in the same spot in the middle. This model helps fix that problem. Recommend printing with at least 3 walls and 20% infill. I printed in PETG as its a little more forgiving than PLA and used some super glue when I put the two pieces of the shelf together, though glue isnt needed. For this model I cleaned some rough edges on my previous fix model and changed tolerances. Adjusted the snap off overhang support to print more reliably and gave the model 0.2mm high built in mouse ear brim supports on the corners to increase reliability. Model can still be printed with no slicer supports.