TRX4m Jerrycans and transport crate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/18 Scale jerrycans and a crate to transport them in.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 382
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an alternative design for jerrycans for the TRX4m. They are 1/18 scale, so could work with an SCX24, FCX24 or FCX18, or Ascent 18. I have included a design for a crate that holds two cans. You could secure them with a rubber band, though they are a pretty snug fit without that.
The file titled "Traxxas TRX4m Jerrycans" has a TRX4m logo stamped in the side. If you are printing these NOT for a TRX4m, I have included a non-branded set titled "1/18 Jerrycans". It is otherwise the same, just without the logo.
All parts are no-support, one-shot prints.