TRX4m Defender hood scoop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hood scoop I designed for my TRX4m Defender. You will have to remove the stock hood bulge, on the lines I…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hood scoop I designed for my TRX4m Defender. You will have to remove the stock hood bulge, on the lines I provided in one of the pictures. I just used some hot glue to secure the hood scoop on the hood post-bulge-removal.
Print it with the wide part on the printplate, facing up. It shouldn't require supports if you do that.
If you print this, please post a make! It helps me gauge community engagement and know what I need to do better. Your feedback is incredibly helpful to me!
Print Settings
Printer Brand:
UltiMaker
Printer:
**Rafts:**Doesn't Matter
Supports:
No
.15mm
Infill:
20% infill or less.
Notes:
You may want to do thicker walls just so the scoop doesn't crush as easily.
Category: R/C Vehicles