TRX4m High Trail stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for the TRX4m High Trail trucks remixed from @Mirsch77. The normal version is really low clearance at…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for the TRX4m High Trail trucks remixed from @Mirsch77. The normal version is really low clearance at full droop, so I added a little bit more height as well as some cutouts for the links to fit the High Trails better. It still should be a no-supports, one-shot print.
UPDATE: I have added a V2 with 10mm more height. If you print this, please post a make! I would love to see your rig on it.
Print Settings
Rafts:
No
Supports:
No
.15mm should be sufficient to get the detail.
Infill:
35% infill recommended.
Category: R/C Vehicles