200mm Magnetic Crosscut Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
200mm magnetic crosscut jig for handsaws. Sized for 12×3mm magnets. Pause at layer 14 to insert during print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 200mm crosscut jig provides a secure 90° guide for handsaws, improving cutting accuracy and consistency. It is designed for 12mm diameter, 3mm thick magnets, but smaller magnets with enough strength will also work.
The reference face will get printed face down to give you a surface that is as flat as your bed. I printed at a 0.3mm layer height - pause at layer 14 to insert the magnets, creating a captive fit during printing. Would recommend mouse ears or a brim as it's a long, narrow print that may want to curl off the bed - although the captive magnets will help.
The reference face will get printed face down to give you a surface that is as flat as your bed.
Important: Consider whether you saw with your left or right hand when printing - the file is for lefties but you can mirror if you are a righty.
Simple, effective, and perfect for improving your hand-cut joints.