Push Up Grips (Now with TPU feet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra chunky grips with optional tpu feet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
You can print two of these on their side with paint on support enforcers. I printed mine in PETG with a .6 nozzle @.4 layer height. Plenty sturdy with those settings.
edit:
After thousands of pushups on multiple surfaces I noticed they like to float around a bit at the apex of a pushup. So I made some simple feet to be printed out of tpu/tpe.
The feet can be printed with whatever flexible you like. I printed mine with some Overture TPU with a .6 nozzle @ .4 layer height 5% infill, They fit like a glove but I would recommend a dab of superglue or some thin double sided tape.
Happy pushing!
