Tubes for glue and resin application. TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tubes for adhesive application like glue, silicone, resin and more. Tubes prints in TPU. Rail and Cap prints in PLA
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Tubes printed in TPU for adhesive application. They can be printed with 5 different nozzle diameters in the top of the tube (1, 1.5, 2, 3 and 4 mm) and 3 different lengths 8, 9, and 11 cm. 1mm nozzle is a bit smal and has a tendens to grow shut when printing. Use 1.5mm for smalest if this happens.
Smal nozzle diameter is for liquids with low viscosity. For viscosity like silicone, use 3mm nozzle.
Areas of application range from liquid glass-clear epoxy resin to sealant, silicone, filler and more.
The advantage of these small tubes is a more precise application of adhesive and resin.
Adhesive is filled into the back of the tube. Press back together and lock with a rail. Print rail and screw cap in PLA. One size fit all for the rail and screw cap. The threads should be printed with 0.1 mm layer height for best results.
If the rail is too narrow to fit the tube, it can be printed in larger sizs. try first 105% in the slicer.
Everything can be printed without support