Schedule 1 Succulent Pot/Grow Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple succulent pot and grow rack from the game Schedule 1
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 489
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Printing instructions:
Print 4x legs with 45deg angled surface on bed. Otherwise all others print like normal
Assembly instructions:
Cut 2 pieces of filament about 1 in/25mm long, use a lighter to heat up the end then smash the end of the filament up against the side of the lighter to mushroom out the end. Slide both up through the bottom of the light and top rack then mushroom the other end of the filament. OR you can just use a piece of wire or string.
Use superglue to glue top ends of the legs to the pockets in the top rack.
I would recommend not glueing the bottom of the legs into the tray in case the plant grows bigger than the rack and you need to get it out.
STEPs included :)