Freezer Door Handle Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the freezer door handle of a refrigerator. Designed to replace the original broken component.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is a 3D-printed replacement part for the freezer compartment handle of a refrigerator.
The original part broke, so I reconstructed it based on the remaining piece and designed this model to fit and function like the original.
It allows easy opening and closing of the freezer door again.
Printing it in a durable material like PETG or ABS is recommended for strength and temperature resistance.
Supports are required during printing to ensure correct geometry.
Recommended settings:
Layer height: 0.2 mm
Infill: 30–40% (for strength)
Material: PETG or ABS
Supports: Yes, under the small hinges and overhangs
Print orientation: Flat side down