1 / 3
Arm Lever for Dancing Santa Claus made by Gemmy — zdjęcie 1
1 / 3

Arm Lever for Dancing Santa Claus made by Gemmy

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Left and Right arm levers

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

There are four models in this design. The arm lever itself that should be printed flat with no supports which allows the stress from the motion of the arms to be opposed to the layer lines. A mirrored version of this model (left and right versions). And fat and skinny cylinders that should be printed flat with no supports and needs to be slightly sanded around the cylinder itself.

The fat and skinny cylinders need to be inserted into the arm lever and super glued in place. They are keyed, so you can only insert them the correct way. They are separate prints so they can be printed flat which allows the stress of the motion be away from printed layers. Printing them vertically might cause them to fail.

All original hardware will be needed. Save all the screws, though, as seen in one of the pictures, I lost one original screw and was able to replace it with a metric hex socket screw and nut (which I think was m3 but maybe m2, not sure).

Apply lithium grease to both cylinders before inserting into the animatronics.

I printed these with PETG and a Ender 3 pro v1 with Sprite extruder upgrade. 50% infill, 5 wall lines, 5 bottom layers, and 5 top layers. The Fusion 360 design file is included as well.

Not included is the cylindrical sleeve required for frictionless motion. You must save the original which can be used on this model or design and print your own.

There are multiple versions of this animatronic Santa Claus by Gemmy. Not sure which version I have but it has a brown base and big red button in the front/center.

Tagi