Sofle v2.1 rgb lids for travel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Howdy! I am new to 3d printing and designing but here is my attempt to create lids for this case. NOTE: Sofle v2.1 RGB
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Howdy! I am new to 3d printing and designing, but here is my attempt to create lids for this case. Please forgive any hiccups; I started learning all this a week ago. NOTE: I am explicitly using the Sofle v2.1 RGB. If you are building your first Sofle, I ran into issues as the model really matters for the case, and you can make a different model work, but not well. For this remix, I took the case, cloned it, and flipped it. I scaled it up to fit around the case. Then I cut out the case from the lid as a negative. It still had the screw knobs so I used the negative sphere to cut them out, then just kept cutting to reduce filament used. I hope this all makes sense!!