Coors Light Fishing Bobber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fishing bobber in the shape of Coors Light can.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Coors Light Bobber (60mm)
(Sorry I didn't have any silver on hand)
I printed this with basic settings;
-Infill 3%
-3 perimeters
-Custom Supports (Just on the bottom of the can)
Non-Printed Parts
-18 gauge wire (you can probably get away with other gauges as well)
-a pen spring
Assembly
Bend the wire like the picture above. Then cut the double ring off the top of the pen spring. Then turn the spring a couple times so it sits like it is in the picture above. Then add a dab of hot glue or super glue so it stays in place. Next insert the wire into the key slot looking hole. Pull the other end out as much as you can and bend it like the picture. Then bend it one last time so that it fits in the hole beside it.
Thank you for considering printing this model and let me know if you have any problems