1 / 5
Baby Jogger Cupholder - City Tour 2 and City Elite 2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cupholder for the Baby Jogger City Tour 2 and City Elite 2 strollers.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
For some reason the cupholder for the City Tour 2 stroller from Baby Jogger, is not accessible in any webshops and stores in my country.
So here is a cupholder that can be fitted in the mounting point on the side of the handle.
It a tight fit by design.
Fit on the City Elite 2 is not yet tested.
Advise to use PETG.
4-6 perimeters
No support needed.
If needed I can make other sizes.
This is 100 mm deep and internal diameter of 75 mm.
