Yukon 48 inch Gridfinity baseplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yukon 48 inch Gridfinity baseplate
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Gridfinity baseplate for Yukon 48 inch workbench. It's a pretty snug fit with minimal movement using the Gridfinity Generator.
An 8U bin will take you to just under the sidewall height but can accept up to 10U using the gap between the draw and workbench itself.
Originally I had the padding on the rear but realized I didn't account for the bolts at the front of the draw handle so I flipped it around. It may be better to have that somewhat usable empty space at the front instead of the back though. Haven't loaded it up yet but if it shifts at all due to the draw being a bit flimsy, I may hot glue stitch the padding areas and see if that helps.
It would be easy enough to do version with small padding in the front if desired. It's an 12 x 10 grid. 515mm x 455mm measured.