Luggage Handle Replacement (Retractable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ours has shattered so the only other option was to throw the suitcase away. Preferably print in PETG or ABS/ASA. PLA…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ours has shattered so the only other option was to throw the suitcase away. Preferably print in PETG or ABS/ASA. PLA might still work but it may degrade quickly. Screenshots with a few critical measurements are provided to help you decide if it applies to your bag. Print int eh orientation shown in the screenshots. I chose 20% rectilinear infill for optimal top layer support, and 0.2 mm layer height for optimal layer strength. And the best feature: the source FreeCAD design is included!
BOM:
- ~100 g filament (PETG, ABS, ASA, or PLA)
- 4 M3x30 countersunk screws
- 4 M3 hex nuts
Category: Replacement Parts