Core one door lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple lock for the core one door with minimal to no hardware and in an easy fast model.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 83
- Wydruki
- 6
- Wyświetlenia
- 856
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a lock designed for the core one door. It is designed so that you will need a longer screw than what is already in the core one but anything longer than 11mm is recommended.* Its a pretty easy print and i did it in pla out of lack of reason to do otherwise and in fear of anything too hard scratching the glass. There are two versions one with magnet inserts to keep it at the right positions but they are definitely not needed in fact id say don't waste the time effort or magnets on it.
*don't have the right screw try my untested probably terrible makeshift replacement pin