Water resistant cover for Wacaco Exagram Pro Scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to improve liquid resistance of the Wacaco Exagram Pro Scale
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Wacaco Exagram Pro is a small excellent scale which will fit small Espresso lever machines like the Cafelat Robot. What it lacks is protection for its USB C charge port and power and mode switches from liquid spills. The touch controls can operate through the transparent insert. The scale can be put into/out of standby mode by long pressing the tare soft button. The pictures show a version which is customized for my setup with a recess for my cup. The version posted doesn't include any cup recess, but someone could make their own recess using CAD or slicer tools. I used CA to affix the translucent window. I used PETG-CF for the main body, but regular PETG would work as well. Likewise a combination of PLA and transparent PLA would also work. Attached pictures show that even with the cover it still fits within the limited width between the Cafelat Robot legs.
The main body was optimized for 0.4 mm nozzle with 0.2 mm first layer and 0.16 following layers. The transparent insert was optimized for 0.4 mm nozzle with 0.1 first layer and 0.1 mm following layers (settings recommended in document listed below).
For best results when printing the transparent insert use settings like outlined in https://wiki.bambulab.com/en/knowledge-sharing/transparent-petg