Melissa and Doug Train Puzzle Gear Piece

Update: 

I've moved some of my obscure, low volume models and profiles to the "other" site. So for downloads head over there.

https://makerworld.com/en/models/1631813-melissa-and-doug-train-puzzle-gear-piece#profileId-1726796

Missing one of those pesky gears from the Melissa and Doug Train Puzzle? I've reverse eng'd the dims to print new one!

They seem to walk away easily. If you’re a parent and you’ve been trying to hide this toy, you know it’s rarely together with all the original gears 😂

 Of course, I've set this up to be 3d printing friendly, and I've built in support underneath the gear to allow the middle cylinder to sit proud 1.5mm and let the gear spin freely. However, you must enable ironing for the support object (separate object). At the very least, enable supports for all top surfaces. 

Printed in PLA on a Bambu Lab A1 Mini. 0.18layer height, 0.6nozzle (.4 or .2 would be better), 3 walls, zhop 0.4, 25% triangles infill for better top surface quality. I'd be curious to try PETG HF on this. 

1.5mm lower support included - turn on ironing for all top surfaces

Bambu Lab PLA Matte 11200 seems to be a good match for the red. Other colors/filaments listed below.

NOTES

Purchasing

If you don't have a 3D printer and would like to purchase this item, you can purchase it here:

https://teleportpod.com/portal/8e3a0b24-859b-4e01-9659-df2390bcdc5a?item=3211

Alternatively, I'd be happy to print it - depending on the color it may be more or less. If you don't care about color - I could print 2 @ $13. Or if you want to pick the color I can do 2 @ $20. Thank you. The link above is pretty rigid in their colors.