Chevrolet Trax/Buick Encore trunk door parcel shelf string holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable parcel shelf string holder for a first generation Chevrolet Trax or Buick Encore.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Do you have a first generation Chevy Trax or Buick Encore? Maybe you live overseas and own an Opel Mokka or a Holden Trax? Have you broken the pegs that hold the string that holds up the package shelf? Want to avoid a visit to the dealer parts counter for an over-priced replacement?
Well, if you can print in PETG or TPU, then LICK_THE_BUTTER over on Thingiverse has the hook-up for you. Try as I might, I haven't been able to find it, or anything similar, on Printables, so after I printed it for myself, I decided to share it here.
I printed it in Creality PETG in black, five perimeters (2.0mm wall thickness) six top and bottom layers (1.2mm floor and ceiling), 20% in-fill, flipped it with the wide, flat side down, supports touching the build-plate. Took about half an hour on my Ender 3 Pro / Sonic Pad combo, printing at 60mm/sec with a 0.4mm nozzle at 0.2mm layer height.
At least with PETG, you may need to file down the little retention nubs to get it in (I had to) and some percussive persuasion might be in order as well (I drove it in tapping it with a dead blow hammer) It's not coming out though.