Spotter Scope/SOFLAM Marker Prop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A non functional SOFLAM Marker/Spotter Scope for your cosplay
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a easily printable prop for a SOFLAM marker/Spotter Scope.
Its divided into many smaller parts so you can easily use different filament colors and get good looking accents.
Please see the provided pictures for assembly instructions, either at the end of the description or at the top with the other pictures. Parts should be already scaled to a point they fit well or snug. Depending on your printer you might need to adjust scaling a bit further.
On one side the opening for the eye leads to the one opening in the front, enabling you to create a version to actually see through. You will need to also create see through lenses in that case. I have provided Lens molds if you want to use UV or epoxy resin (results might vary). If you do not care about that, you can simply print the lenses and optionally add a bit of reflective foil to the front one.
The only additional screw you need are:
3x M3x20 Screws (Nuts optional)
1x Screw for the Front Cap
2x Screw for the Side Caps
The Caps do not rotate onto the lens openings and they do not fit. The base model didnt fit and i had to further increase thickness so its printable in some places. Since its only a cosplay prop, i wasnt bothered by that.
Assembly Pictures:
Front:
Top:
