Star Trek Discovery Communicator

Here is a remix of the awesome Discovery communicator kit designed by mooslug. I love how the model is accurate so I wanted to make it as a static prop without electronics. I solidified the body and made the flip-up hinge mechanism printable and no screws are needed. The lid was split up in layers so it can be printed flat without having unsightly under-sides from using supports. Also added pegs and notches to help align the face panels and trimmings. 

• There are tiny pegs that can be used to align the lid's layers--use a tweezer to insert them. The original unsplit lid is there too. 
• For the body I enabled ironing in prusaslicer that made the top layers much smoother than they would have been without it.
• Use a fine point to apply light amounts of glue to join the lid parts.
• The part called 'lid 2' has little removable adhesion discs on the tips to help prevent warping up from the bed.
• Use supports for axle, lid 1, delta, back, and maybe the body.
• You may have to use a razor blade or file to remove bumps to smooth out the axel assembly.
• I printed the back cover upright.

Assembly instructions:

1. Insert the axle with the 'R' pointing right (face up), and insert and glue the back of the clasps into the slots on the body once attached to the axel. 
2. Glue the 'lid 1' part's wheels to the axle in the correct orientation--the slots should line up with the axle like a flat head screwdriver does. 
3. Then use the tiny lid pegs to help align and glue the lid 2 part to lid 1. 
4. Align and glue the 'lid 3' part to the top. 
5. Attach the delta to the back then glue the back to the body using the delta's peg to help align it. The rest should be straightforward. 

Update November 18 2023 - Added sized graphics as a PDF file. 

Buy prints of this model:

Ancient Stone Inspirations - https://ancientstoneinspirations.com/product/star-trek-discovery-communicator-prop-cosplay-with-stand/