Ölkanne Halterung für Bernardo P600G Spänewand; Oil can holder for Bernardo P600G chip wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ölkanne Halterung für Bernardo P600G Spänewand; Oil can holder for Bernardo P600G chip wall
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Halterung für Ölkanne für die Spänerückwand der Bernardo P600G.
Durchmesser 90 mm, Tiefe 50 mm bzw 70 mm
Montage: vorne einhängen und nach hinten kippen.
Material: PETG oder PLA, wobei PETG etwas elastischer ist und sich bei der Montage leichter elastisch verformt und weniger bruchgefährdet ist als PLA.
Druck: aufrecht stehend, mit Supportmaterial für den Haken
……………………..
Oil can holder for the Bernardo P600G's chip rear panel.
Diameter 90 mm, depth 50 mm or 70 mm
Installation: Hook in at the front and tilt backward.
Material: PETG or PLA, although PETG is slightly more elastic and deforms more easily during installation and is less prone to breakage than PLA.
Print: Upright, with support material for the hook