Playseat pedal base clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a more robust clamp for my Playseat Challenge pedal base.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 575
- Wydruki
- 4
- Wyświetlenia
- 3638
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I wanted a more robust clamp for my Playseat Challenge pedal base. And I still had to be able to fold it.
And also the base has to be able to put on a angle without putting a lot of stress on the new clamps.
I made this for M6 hardware that I had already. That are M6x15 bolts with a philips head.
Load the stl files in your slicer or use the 3mf file (and change to your filament and printer settings) to get the parts loaded with support enforcers. It will print without supports but one corner of the channel for the pedal base will sag a little.