Star Trek Voyager 29th Century Phaser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very easy kit to build the future phaser from Voyager.
- Ocena
- 4,75 / 5
- Polubienia
- 85
- Pobrania
- 439
- Wydruki
- 4
- Wyświetlenia
- 1483
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Here's a 29th century phaser as seen in a couple Voyager episodes. Putting it together should be easy as there are few parts. They are split up to be mostly support-free but only a little bit of support will be needed on the emitter bottom. Also included the whole versions of the emitter and handle. Not sure on the scale, if it seems small just scale up a bit.
This is a very easy print and all the parts fit together nicely. The filaments I used were Eryone glitter silver and black PLA.
Use color change/swapping for the display stand tag.
Here is a guide that explains how color swapping works, at least with Prusaslicer: https://help.prusa3d.com/en/article/color-change_1687