1 / 1
40mm Arcade Joystick Ball Top (Fits Sanwa JLF/JLX)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
40mm diameter, 37mm height ball top for Sanwa JLF/JLX joysticks. 3D printable and weight-tunable via infill settings.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is a 40mm diameter, 37mm height joystick ball top designed for arcade sticks and custom fighting controllers.
Features:
- Compatible with Sanwa Denshi JLF and JLX series joystick shafts
- Standard ball shape for arcade lever tops
- Ergonomic size for comfortable grip
- Easy-to-print design (optimized for FDM)
Shaft hole specification:
- M6 diameter (approx. 6mm)
- 12mm depth
- Designed for direct fit onto Sanwa JLF/JLX shafts
(Tapping may be required depending on print precision.)
Additional Tips:
- You can control the weight by adjusting the infill density.
When using PLA filament, the finished weight can vary between approximately 5g to 35g depending on settings. - If you want to reinforce the shaft hole area for better durability, it is recommended to add a modifier mesh or a similar technique in your slicer settings.
- The bottom edge may feel slightly sharp after printing; a light sanding will make it smoother and more comfortable to hold.
- Printing with a 0.2mm nozzle is recommended for smoother surface finish on the sphere.
However, using a 0.4mm nozzle results in a rougher texture, which may improve grip. Choose based on your preference. - If the seam (layer start point) bothers you when holding the ball top, try adjusting your slicer’s seam settings (such as "Seam Position" or "Randomize Seam") for better results.