Tower / Castle Figure for Boardgame (simplified)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a very first and a very simple design I made.
I planned to use it as a simple Tower / Castle figure in one of my boardgames.
Printed on MK3S+, with PLA in 0.3mm as a draft and proof of concept.
No supports needed. Used brim, although not sure if necessary.
Print took 32mins.
If you are planning to use it frequently I would recommend to choose 0.2mm or 0.1mm option.
On 0.1mm print is approx 1h.
Available files
STL - “Simple_Tower.stl”
- standard STL file to be used to choose your own settings for printout
MF3 - “Simple_Tower.mf3”
- project file with all the settings that have been exported to also attached .gcode
Gcode - “Simple_tower_0.3mm_PLA_MK3S_21m.gcode”
- ready to go print file