1 / 7
Simple Filament Dryer - Use your Heated Bed!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament drying solution, designed for direct use on the heated bed of a 3D printer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Description
DryBox HeatBed is a filament drying solution designed for direct use on the heated bed of a 3D printer. The system includes:
- A 3D-printed base equipped with a fan for active ventilation
- A cardboard enclosure optionally insulated with bubble wrap to retain heat
- An adjustable air vent to control internal airflow and moisture release
The heated bed warms the interior of the box, while the fan ensures uniform temperature and air distribution. The vent allows tuning of air exchange. Perfect for a simple, low-cost, way to dry filament prior to printing without the need for a dedicated dryer.
- I reused the external box that Prusa used to ship my order of two 1kg filament spools, which fits perfectly for two spools.
- The effective temperature of the air inside the box is about 20 degrees cooler than the bed, so for drying PLA a bed at around 65 degrees may be suitable, depending on fan, insulation and ambient temperature
- The fan is from an old laptop, I remove the original frame and glued the circular base to the PETG base