WWII B-17 Vertical Stabilizer Bookmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
B-17 tail fin bookmark I made for my WWII books. I'm hoping my model encourages people to read :)
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
B-17 tail fin bookmark I made for my WWII books. I'm hoping my model encourages people to read :)
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
No
Supports:
No
.2, .12
Infill:
100
Notes:
IMPORTANT; I suggest using a .2 mm nozzle and .12 mm layer height for the "Group Letter" and "Letters" because they are very small.
For the "Group Letter" file, you just need to do a filament change (see how to here; https://www.youtube.com/watch?v=1nBnVtOEAiY&t=3s )
For the "Letters" file, I suggest printing them with a -.1 mm horizontal expansion so they fit properly
The bookmark itself can be printed with a regular .4 mm nozzle and .2 mm layer height. I do recommend setting your wall line count to 1, it makes the area around the letter holes look better
Other than that, I suggest making sure your printer is really dialed in
Category: Organization