[OECD] Magnet USB-C adapter charging dock for Hyperx Pulsefire Saga mouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dock for charging your wireless mouse via USBC. Fitting the Hyperx Pulsfire Saga. Preferrably used with magnetic adapter
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: I don’t own a HyperX mouse, so the fit has not been tested. Use at your own discretion.
Small dock to fit your wireless mouse into while charging. Simply snap it into place by using a magnet usb c adapter fixed into the front of the dock or slide it onto a regular cable (only the base without the hooks in the back, results may vary).
If you do not use the base use 2x M3x10screws to hold your usb cable or adapter in place. Make sure to not overtighten the screws.
The base can be used to fix the dock to your table or another surface with wood screws (≤3.5mm diameter), Magnets (≤10mm diameter) or a rectangular weight (like tire balancing weights) set into the corresponding opening. If it is used, screw the assembly together with 6 M3x12 (or 4 M3x12 and 2 M3x5 when using the hookless main part) screws instead.
Fitted to the HyperX Pulsefire Saga. The dock with the hooks in the back currently only fits to mousebody 1 (the one with the bezel and logo on top) without thumbrest. In other cases use the design without the hooks. Other mice might fit kind of, as can be seen with my Cherry Stream on the pictures.
I use a Magtame USB-C adapter, others should work as well if they are not too wide for the mouse (limit ~14mm width of the plug)