QIDI Plus 4 Filler Spool Holder Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Filler Spool Holder for the Qidi Plus 4
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 185
- Wydruki
- 2
- Wyświetlenia
- 695
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Had this on my Ender 3v2 and loved how smooth it was so thought I'd make one for the Plus 4!
Using Dan Lavoie's model to capture the base mounting point for the original Plus 4 spool holder I was able to remix HugoHuge's Filler Filament Holder for the Qidi Plus 4 :).
Rolls smooth as butter. No more issues with any spools getting caught up on the stock holder, especially cardboard ones!
Printed with Qidi 0.2mm profile in PLA+. 4 Walls 15% infill is plenty strong.
Need 2 608ZZ bearings. I used these:
https://www.amazon.com/dp/B07216D1SZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
