Shernbao PWD-921P Anionic Handle Ring Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shernbao PWD-921P Anionic Wall-mount Dryer (Luxury Series) handle ring Replacement with screw holes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ATTENTION: This model was created for the screws and nuts to be added separately afterwards.
It is better to print with PETG, as PLA would melt around the screws because they would get hotter and more quickly.
Even though it was measured during modeling, I found that printing it in 101% scale was better, it did not get stuck and could spin around both easily and without coming off.
I decided to model it with the screw holes being open from the inside to let the screws into the rail, thus making it more stable and durable.